36" BLANCHARD VERTICAL SPINDLE ROTARY SURFACE GRINDER, NO. 20-36, MAG. CHUCK, 40 HP WHEEL MOTOR, 1977

Brand
BLANCHARD

Model
20-36

Stock #
6659

Condition
Good

Year
1977

Specifications

Equipped With

PRELIMINARY SPECIFICATIONS
20-36 BLANCHARD "EXTENDED COLUMN" ROTARY SURFACE GRINDER
YEAR 1977

36" DIA. BLANCHARD ONE-PIECE STEEL
MAGNETIC CHUCK
WATER GUARDS
20" CYLINDER WHEEL HOLDER
JOG PUSH BUTTON FOR TABLE ROTATION
WORK LIGHT OVER TABLE
QUICK ACTING COOLANT VALVES AND WASH HOSE
OUTSIDE CHUCK RIGN
WHEEL DRESSER UNIT BUIL INTO HEAD
40 H.P. WHEEL MOTOR BUILT INTO HEAD
2 H.P. CHUCK ROTATION MOTOR
(2) 20 LB. FT. TORQUE MOTORS
      - ONE FOR TABLE TRAVERS
      - ONE FOR RAISING & LOWERING THE WHEEL HEAD
REDUCED VOLTAGE PUSH BUTTON CONTROLS
HARDENED STEEL BASE WAYS W/AUTOMATIC LUBRICATION
OPERATOR'S MANUAL

WORK CLEARANCE
38" DIA. SWING CLEARANCE INSIDE THE WATER GUARDS
24" VERTICAL HEIGHT (RANGE) IS REQUIRED BETWEEN THE TOP SURFACE OF THE 36" DIA. CHUCK AND THE GRINDING SURFACE OF A NEW GRINDING WHEEL IN ITS RAISED POSITION.

WORK TABLE
BLANCHARD MAGNETIC CHUCK
36" DIA. WITH 5/8" RADIAL SPACING BETWEEN CONCENTRIC POLES.
2" DIA. CENTER HOLE IN CHUCK
CHUCK USES DIRECT CURRENT (VOLTAGES 115 OR 230)
3,000 LB MAXIMUM WEIGHT OF WORKLOAD

40 H.P. WHEEL MOTOR

WHEEL HOLDER
20" X 5" 16-1/2" CYLINDER WHEEL
OR
20" COURTLAND TYPE SEGMENT CHUCK WHICH HOLDS FOUR SEGMENTS

WHEEL SPEEDS
720 RPM @ 60 cps
750 RPM @ 50 cps

CHUCK SPEEDS
6, 9, 12, 18, 25, & 33 RPM - DRIVEN @ 60cps BY A 2 H.P. / 12,000 RPM MOTOR

FEED
VERTICAL DOWN FEED OF THE WHEEL IS EITHER BY HAND OR BY POWER

COOLANT SUPPLY
"WET" BASE CAPACITY OF 20-36 AND 20K-36 IS 125 GALLONS

APPROX. DIMENSIONS & WEIGHT
137" L X 67" W X 100" H
12,500 LBS

**PRICE INCLUDES CLEANED, PAINTED, & CYCLED**

AVAILABLE FOR INSPECTION
CALL YOUR SALESPERSON FOR AN APPOINTMENT

Association of machinery and Equipment Appraisers
Machinery Dealers National Association
Precision Metalforming Association
Presses For Industry
20501 Hoover Road
Detroit, MI 48205
Connect With Us