Tel: (313) 839-9300 Fax: (313) 839-9600

4000 Ton, SCHULER, (5) PRESSES, 212"X108"BA, CUSHIONS, ROLLING BOLSTERS, 1998

Our Stock Number: 4750

4000 Ton, SCHULER, (5) PRESSES, 212"X108"BA, CUSHIONS, ROLLING BOLSTERS, 1998

HISTORY:
This Schuler Hydraulic Tandem Line was used to manufacture heavy
gauge stampings for lower vehicle structures, truck & SUV frames
and crash management systems such as side rails and front and
rear crash beams.

PRELIMINARY SPECIFICATIONS:

PRESS 1
MODEL HZPUI-T 4000/2600-212X108
NEW IN 1998
DOUBLE ACTING HYDRAULIC STRAIGHT SIDE DRAW PRESS
4000 TON TOTAL CAPACITY
2600 TON DRAW SLIDE CAPACITY
1400 TON BLANK HOLDER CAPACITY
76" DRAW SLIDE STROKE
52" BLANK HOLDER STROKE
98" DAYLIGHT OPENING
212" X 108" BED AREA
181" X 73" DRAWING SLIDE AREA

EQUIPPED WITH:
2040 HP (TOTAL) MOTORS
ALLEN BRADLEY PLC CONTROL SYSTEM
450 TON CUSHION
- 12" STROKE
(2) ROLLING BOLSTERS (L-R)
- HYDRAULICALLY OPERATED
- EACH WITH AUTOMATIC HYDRAULIC DIE CLAMPING
HYDRAULIC QUICK CHANGE DIE SYSTEM IN SLIDE

APPROX O.A. WEIGHT: 740 US TONS
APPROX O.A. DIMENSIONS:


PRESS 2
MODEL HZPU-T 3000-212X108
NEW IN 1998
SINGLE ACTING HYDRAULIC STRAIGHT SIDE PRESS
3000 TON CAPACITY
82" STROKE
89" DAYLIGHT OPENING
46" SHUT HEIGHT
43" SLIDE ADJUSTMENT
212" X 108" BED AREA
212" X 108" SLIDE AREA

EQUIPPED WITH:
1320 HP (TOTAL) MOTORS
ALLEN BRADLEY PLC CONTROL SYSTEM
450 TON CUSHIION
- 12" STROKE
(2) ROLLING BOLSTERS (L-R)
- HYDRAULICALLY OPERATED
- EACH WITH AUTOMATIC HYDRAULIC DIE CLAMPING
HYDRAULIC QUICK CHANGE DIE SYSTEM IN SLIDE

APPROX O.A. WEIGHT: 600 US TONS
APPROX O.A. DIMENSIONS:


PRESS 3
MODEL HZPU-T 1500-212X108
NEW IN 1998
SINGLE ACTING HYDRAULIC STRAIGHT SIDE PRESS
1500 TON CAPACITY
82" STROKE
89" DAYLIGHT OPENING
46" SHUT HEIGHT
43" SLIDE ADJUSTMENT
------------------------------------------------
212" X 108" BED AREA
212" X 108" SLIDE AREA

EQUIPPED WITH:
720 HP (TOTAL) MOTORS
ALLEN BRADLEY PLC CONTROL SYSTEM
450 TON CUSHIION
- 12" STROKE
(2) ROLLING BOLSTERS (L-R)
- HYDRAULICALLY OPERATED
- EACH WITH AUTOMATIC HYDRAULIC DIE CLAMPING
HYDRAULIC QUICK CHANGE DIE SYSTEM IN SLIDE

APPROX O.A. WEIGHT: 402 US TONS
APPROX O.A. DIMENSIONS:


PRESS 4
MODEL HZPU-T 1500-212X108
NEW IN 1998
SINGLE ACTING HYDRAULIC STRAIGHT SIDE PRESS
1500 TON CAPACITY
82" STROKE
89" DAYLIGHT OPENING
46" SHUT HEIGHT
43" SLIDE ADJUSTMENT
212" X 108" BED AREA
212" X 108" SLIDE AREA

EQUIPPED WITH:
720 HP (TOTAL) MOTORS
ALLEN BRADLEY PLC CONTROL SYSTEM
450 TON CUSHIION
- 12" STROKE
(2) ROLLING BOLSTERS (L-R)
- HYDRAULICALLY OPERATED
- EACH WITH AUTOMATIC HYDRAULIC DIE CLAMPING
HYDRAULIC QUICK CHANGE DIE SYSTEM IN SLIDE

APPROX O.A. WEIGHT: 402 US TONS
APPROX O.A. DIMENSIONS:

NOTE: THIS PRESS IS OFTEN USED IN THE "DEAD HEAD" POSITION,
MEANING THAT THE PRESS STAYS OPEN WITH NO DIE IN PLACE. PARTS ARE
PASSED THROUGH THE OPEN PRESS BY THE LOADER AND UNLOADER ROBOTS
BUT NO PRESS OPERATION TAKES PLACE AT THIS STATION. AS A RESULT
THIS PRESS HAS VERY FEW OPERATING HOURS.


PRESS 5
MODEL HZPU-T 1500-212X108
NEW IN 1998
SINGLE ACTING HYDRAULIC STRAIGHT SIDE PRESS
1500 TON CAPACITY
82" STROKE
89" DAYLIGHT OPENING
46" SHUT HEIGHT
43" SLIDE ADJUSTMENT
212" X 108" BED AREA
212" X 108" SLIDE AREA

EQUIPPED WITH:
720 HP (TOTAL) MOTORS
ALLEN BRADLEY PLC CONTROL SYSTEM
450 TON CUSHIION
- 12" STROKE
(2) ROLLING BOLSTERS (L-R)
- HYDRAULICALLY OPERATED
- EACH WITH AUTOMATIC HYDRAULIC DIE CLAMPING
HYDRAULIC QUICK CHANGE DIE SYSTEM IN SLIDE

APPROX O.A. WEIGHT: 402 US TONS
APPROX O.A. DIMENSIONS:


AUTOMATION & RELATED ANCILLARY SUPPORT EQUIPMENT:
SCHULER/ISI BLANK DE-STACKER SYSTEM
- (2) CRANE-SAVR GANTRY TYPE PICK & PLACE ROBOTS
- (2) 223" X 110" CONVEYORIZED BLANK TABLES
3-SECTION PRESS FEED CONVEYOR
REJECTED PART CONVEYOR & DISCHARGE CHUTE
MANUAL FEED BY-PASS CONVEYOR AND TRACK MOUNTED BY-PASS CONVEYOR
- TO REPLACE BLANK WASHER
GMG/SCHULER AUTOMATIC BLANK WASHER
- 204" WIDE
- TRACK MOUNTED
- 1500 GALLON RESERVOIR
- (3) 10HP WASH PUMPS
- CANISTER FILTERS & MIST COLLECTOR
SCHULER/KUMA MODEL FA10/3 WASHER FILTRATION SYSTME
- DRAG OUT CONVEYOR & PAPER FILTER
(5) ISI/PATHFINDER MODEL PFR-7 2-AXIS PRESS LOADER ROBOTS
(5) ISI/PATHFINDER MODEL PFR-7 2-AXIS PRESS UNLOADER ROBOTS
(1) ISI/PATHFINDER MODEL FTTX-2 SINGLE SECTION TRANSFER/ROLLOVER
(6) ISI/PATHFINDER MODEL DMST PRESS SHUFFLE UNITS


THIS TANDEM LINE IS IN EXCELLENT CONDITION AND UNDER POWER FOR
INSPECTION.

VIEW A LIVE DEMONSTRATION OF THIS MACHINE BY CLICKING HERE.

Request A Quote

Your Name *
Email *
Phone *
Fax *
Company *
Address *
Include Country
How Did You Hear Of Us? * UEN/UED
Locator Service
Surplus Record
MachineTools.com
Trade Show
Other
Comments
 





Photos Of This Machine

Request A Quote Tell A Friend